1.3 inch IPS LCD display module with 240x240 square resolution

This 1.3 inch IPS LCD full colour display module provides a 240x240 square image in a 23.4x23.4 mm display area. The compact format suits builds where screen space is tight, while the full-view viewing direction helps the image remain visible from different angles. The source states that the IPS colour screen is more vivid than an ordinary TFT LCD, and the display direction can be adjusted to suit the orientation of the project. The module uses the ST7789 control chip and supports both 8-bit parallel port and 4-wire SPI interface options.

Features and display quality

The key details are straightforward and measurable: 1.3 inch screen size, 240x240 resolution, 23.4x23.4 mm display area, and 27.78x39.22 mm physical size. This makes it easy to plan the front panel cut-out or enclosure space before fitting the module. The full-view angle is a practical advantage where the screen may be read from above, from the side, or at an angle rather than straight on. Because the display direction is adjustable, the same module can be aligned to different build layouts without changing the hardware specification.

Compact square design

The square display format is one of the most specific points in the source data. At 240x240 resolution, the panel gives equal width and height, which is useful when a project needs a symmetrical screen layout. The active display area measures 23.4x23.4 mm, while the overall physical size is 27.78x39.22 mm. Those figures matter when planning clearances around bezels, mounting points, or tight PCB positions. The source also identifies the screen as a high-definition IPS colour screen, with colour described as more vivid than ordinary TFT LCD.

Connection and control details

The control chip is ST7789. Interface support includes an 8-bit parallel port and a 4-wire SPI interface, with 8-bit parallel port listed as the default. The module has 18 pins, although the pins are not provided by default, so they must be dealt with separately by the buyer. That is important for assembly planning, especially where a project requires a specific connector style or soldering approach. No power consumption figure is supplied in the source text, so no electrical performance claim is made here beyond the stated chip and interface details.

Operating range and build limits

The operating temperature is given as -20 to 70 degrees, which provides a clear use boundary for project planning. Within that range, the module is intended for general electronic applications that need a compact colour display rather than a large panel. The source does not specify brightness, contrast ratio, backlight type, cable length, or mounting method, so those items are left out. What is confirmed is simple and useful: a 1.3 inch IPS LCD module, a 240x240 square display, and a physically compact frame of 27.78x39.22 mm.

Applications and fitting options

This display module is suited to electronics projects that need a small colour screen with exact dimensions. The source information supports use in compact builds where the display area and physical size both need to be known before installation. Because the display direction can be adjusted and the viewing direction is full-view, the module gives some flexibility in how it is positioned. The interface choice between 8-bit parallel and 4-wire SPI also gives builders two connection paths to work with.

Project integration

The ST7789 control chip and dual-interface support make the module relevant to custom electronics assemblies that require a small square screen. The default 8-bit parallel port may suit one wiring approach, while the 4-wire SPI option offers another. The 18-pin layout is a clear assembly point, although the pins are not included by default. For builders planning a neat fit inside a housing, the 27.78x39.22 mm physical size and 23.4x23.4 mm display area give the measurements needed before cutting a front panel or selecting a mounting position.

Everyday build use

In a home project, the compact 1.3 inch format keeps the display footprint small while still offering a 240x240 colour output. The full-view angle helps the screen remain readable when viewed from different positions around a desk or workbench. Since the display direction can be adjusted, the screen can be aligned to suit the way the project is held or mounted. The vivid IPS colour screen description in the source text indicates a panel intended to show clearer colour than ordinary TFT LCD alternatives, without adding claims that are not stated.

Versatile mounting use

The size and interface details make this module practical for different types of compact electronic work. A project can use the 8-bit parallel port as the default option or choose the 4-wire SPI interface if that suits the wiring plan better. The square 240x240 layout supports neat on-screen graphics, menus, or readouts where symmetry matters. With the display area at 23.4x23.4 mm and physical dimensions at 27.78x39.22 mm, the module gives enough information for accurate placement in a small enclosure.

Benefits and practical value

The value of this display module lies in the exact specification rather than broad claims. It gives a clearly defined 1.3 inch screen, a 240x240 square resolution, and an IPS viewing angle described as full-view. The interface and control chip are named in the source text, which helps with project matching before purchase. Because the package includes one display only and the pins are not provided by default, buyers can plan the rest of the build with those limits in mind.

Measured specification value

The physical size of 27.78x39.22 mm and display area of 23.4x23.4 mm are the main practical numbers here. They help reduce the risk of buying a screen that does not fit the enclosure. The operating temperature range of -20 to 70 degrees adds another defined boundary for installation planning. Since no extra accessories are listed, the package remains clear: Display*1. That makes the specification easy to assess against the requirements of a compact electronics project.

Specification confidence

Confidence here comes from the listed data. The panel uses an ST7789 control chip, supports 8-bit parallel and 4-wire SPI interfaces, and has an adjustable display direction. Those details are specific enough for matching to a controller board or custom wiring plan. The full-view angle and vivid IPS colour screen description support readable output without relying on vague wording. For anyone needing a small square display with known dimensions, the listed measurements do the job.

Clear purchase choice

If the project needs a 1.3 inch IPS LCD with a 240x240 square format, this module gives the relevant figures up front. The display area, physical size, control chip, pin count, and operating range are all stated in the source text. That makes comparison with other modules more direct. The package contents are simple, the interfaces are clearly listed, and the screen direction can be adjusted. For a compact display build, those are the facts that matter.