LED Gold Work Light 50W 5000lm 6500K Yellow Light 12-30V Die-Cast Aluminium Alloy Off-Road Vehicle Modification for Jeep Wrangler Dodge Toyota
LED Gold Work Light 50W 5000lm 6500K Yellow Light 12-30V Die-Cast Aluminium Alloy Off-Road Vehicle Modification for Jeep Wrangler Dodge Toyota
50W LED Gold Work Light 5000lm Yellow for Off-Road Vehicle Modification
This LED work light is built around a 50W LED source that emits 5000lm of yellow light at a 6500K colour temperature. It operates on 12-30V at 2.5A, so it can be used on vehicles with either 12V or 24V systems within that range. The model number is OL-1950, and the housing is made from die-cast aluminium alloy. It is intended for off-road vehicle modification and is listed as suitable for Jeep Wrangler, Dodge, Toyota Land Cruiser and similar off-road vehicles. The light is supplied as a single pack in yellow light.
Features and Construction
The main technical details cover the light source, electrical requirements and housing material. These are the points most useful when checking whether the lamp matches a vehicle and its wiring.
LED Light Source and Output
The light source is LED, with a stated power of 50W and a luminous flux of 5000lm. The colour temperature is 6500K, and the light colour is yellow. The LED is rated for 30,000 hours of life, which is the only lifespan figure provided in the source information. No beam pattern or beam angle is stated, so the light output should be assessed on the 5000lm figure and the yellow light colour alone.
Electrical Requirements
The light runs on 12-30V and draws 2.5A. This voltage range covers common 12V and 24V off-road vehicle systems, but the circuit must be able to supply the stated 2.5A current. The 50W power figure should also be considered when checking fuses and wiring. No connector type, cable length or switch is specified in the source information.
Housing and Dimensions
The housing is made from die-cast aluminium alloy. The model number is OL-1950, and the accessory number is also listed as OL-1950. The dimensions are 11.6 x 14.1 x 4.8 mm. These are the only measurements given, and no weight, bracket size or mounting hole spacing is provided. The compact size should be checked against the intended mounting position before purchase.
Uses and Placement
This lamp is listed for off-road vehicle modification, with named vehicle examples. Its size and voltage range make it relevant to a small set of vehicle-based uses.
Off-Road Vehicle Modification
The light is intended for off-road vehicle modification and is listed as suitable for Jeep Wrangler, Dodge, Toyota Land Cruiser and other off-road vehicles. It can be used as an auxiliary or work light where a 12-30V supply is available. Installation should follow the vehicle manufacturer's guidance and any local rules on auxiliary lighting. No mounting bracket or wiring kit is stated as included.
Event and Professional Use
The 5000lm output and yellow light colour make the lamp relevant to off-road events, site work and similar tasks where a 12-30V work light is needed. The 6500K colour temperature is a cool white figure, while the light colour is listed as yellow. No IP rating or waterproof specification is given, so use in wet or dusty conditions cannot be confirmed from the source information.
Everyday Home Use
The 12-30V operating range means the light is not a mains-powered household lamp. It could be used on a 12V or 24V vehicle or battery system within that range, subject to the 2.5A current draw. No domestic mounting kit, plug or transformer is included in the source details. Any home or workshop use would depend on a suitable low-voltage supply being available.
Benefits and Buying Value
The value of this product rests on its stated LED output, voltage range and metal housing. These points are covered below without adding claims that the source does not support.
LED Life and Maintenance
The LED light source is rated for 30,000 hours. This is the only life figure provided, and it applies to the light source rather than the whole unit. The die-cast aluminium alloy housing is a metal construction, but no coating, sealing or corrosion-resistance detail is given. No cleaning or servicing instructions are stated in the source information.
Why Choose This Product
This light combines a 50W LED, 5000lm output, 6500K colour temperature and 12-30V operating range in a die-cast aluminium alloy housing. It is listed for off-road vehicle modification on Jeep Wrangler, Dodge, Toyota Land Cruiser and similar vehicles. The single-pack yellow light format and 30,000-hour LED rating are the main concrete figures. Buyers should confirm the 11.6 x 14.1 x 4.8 mm size and the 2.5A current draw against their own vehicle setup.
